基于物方影像匹配和概率松弛的断面自动提取   总被引：4，自引：0，他引：4  

郑顺义  张祖勋  张剑清 《测绘信息与工程》2004,29(2):26-27

提出了基于物方影像匹配的断面提取,为了提高匹配的可靠性,引入了概率松弛法,最终获得了高精度的断面.  相似文献   

一种基于DCT变换的盲水印检测算法     

梁杰  李吉星 《武汉大学学报(信息科学版)》2004,29(7):632-634

提出了一种基于DCT变换的盲图像水印算法。实验表明 ,该算法对典型攻击具有较好的鲁棒性。  相似文献   

基于光谱信息的遥感图像空间域自适应滤波   总被引：5，自引：0，他引：5  

吴传庆  赵永超  童庆禧  郑兰芬 《遥感学报》2004,8(1):51-55

遥感图像往往由于内外因素的干扰含有各种噪声 ,为提高图像质量人们对其进行滤波。常规的滤波方式完全基于图像空间域 ,在消除异常点使图像平滑的同时使边界变得不清楚从而使图像模糊 ;或者正相反 ,在边缘信息得到增强时也放大了图像噪声而使图像变得粗糙。该文的自适应滤波方法充分利用多光谱和高光谱遥感图像的光谱维信息 ,滤波时不仅要使均匀的地块得到平滑 ,而且要使地块间的边缘、局部的异常点、线仍然得到保存、在光滑的同时尽量保持原有的数值特征  相似文献   

高分辨率遥感影像的精纠正   总被引：10，自引：1，他引：10  

张剑清  张勇  郑顺义  张宏伟 《武汉大学学报(信息科学版)》2004,29(11):994-998

论述了对高分辨率遥感影像进行精纠正获得正射影像的关键技术。若干实际不同分辨率的高分辨率遥感影像被用于相应的实验，实例证明了本文算法的正确性。  相似文献   

基于EM算法和单幅雷达图像阴影的控制点坡度校正   总被引：1，自引：0，他引：1  

钱俊  舒宁 《武汉大学学报(信息科学版)》2004,29(12):1089-1092

对在我国现有的条件下进行控制点坡度校正的必要性进行了阐述，并分析了EM算法。根据EM算法以及基于区域增长的余弦散射模型建立了控制点坡度校正模型，并用河北省张北地区的雷达影像进行了实验，取得了较高的精度初值。  相似文献   

基于光谱空间密度分析的边缘提取     

刘楠  舒宁 《武汉大学学报(信息科学版)》2004,29(12):1093-1096

针对传统的边缘提取方法大部分不适应高光谱数据的特点，提出了基于光谱空间密度分析边缘提取的思想。在分组主分量变换提取第一主分量作为特征维的基础上，采用面向对象的二次判别边缘的方法，通过立体判决将光谱空间中低密度超椭球体集群视为真实边缘点集群。试验表明，此方法是合理可行的。  相似文献   

概率神经网络与BP网络模型在遥感图像分类中的对比研究   总被引：6，自引：0，他引：6  

李朝锋  杨茂龙  许磊  杨蒙召 《国土资源遥感》2004,15(4):11-13,18

通过分析概率神经网络(以下称PNN)的基本结构及其训练算法,建立了卫星图像分类的概率神经网络模型,并通过实例对比分析了概率神经网络与BP网络分类模型的分类效果。实验表明,PNN图像分类方法在分类精度上优于误差反向传播神经网络模型,且分类时间相当,是一种有效的图像分类方法。  相似文献   

基于常规扫描仪的植物叶面积计算系统   总被引：4，自引：0，他引：4  

李万春  田燕  王鹏云 《气象》2004,30(8):39-41

以计算机和扫描仪的组合技术为基础 ,用ViscalBasic 6 0语言 ,建立了Lea fArea1 0植物叶面积计算系统 ,经过对扫描图片的像素分析 ,实现了植物叶面积测定 ,其测定的误差小于 2‰ ,是一项易于业务化的应用系统。  相似文献   

Accuracy analysis, dem generation and validation using russian tk-350 stereo-images     

Gürcan Büyüksalih  Güven Koçak  Murat Oruç  Hakan Akçin  Karsten Jacobsen 《The Photogrammetric Record》2004,19(107):200-218

TK-350 stereo-scenes of the Zonguldak testfield in the north-west of Turkey have been analysed. The imagery had a base-to-height ratio of 0·52 and covered an area of 200 km × 300 km, with each pixel representing 10 m on the ground. Control points digitised from 1:25 000 scale topographic maps were used in the test. A bundle orientation was executed using the University of Hanover program BLUH and PCI Geomatica OrthoEngine AE software packages. Tests revealed that TK-350 stereo-images can yield 3D geopositioning to an accuracy of about 10 m in planimetry and 17 m in height. A 40 m resolution digital elevation model (DEM) was generated by the PCI system and compared against a reference DEM, which was derived from digitised contour lines provided by 1:25 000 scale topographic maps. This comparison showed that accuracy depends mainly on the surface structure and the slope of the local terrain. Root mean square errors in height were found to be about 27 and 39 m outside and inside forested areas, respectively. The matched DEM demonstrated a systematic shift against the reference DEM visible as an asymmetric shift in the frequency distribution. This is perhaps caused by the presence of vegetation and buildings.  相似文献   

Analytical methods Of assessing the image quality associated with digital and photographic imaging systems     

Grant H. Thomson 《The Photogrammetric Record》2004,19(107):237-249

The introduction of digital cameras for aerial survey photography and use of scanners with processed aerial film present a number of technical questions concerning the way photography is to be acquired in the future. Among the questions to be addressed are the comparative metric properties of images acquired by each system and the associated image quality characteristics. The new digital camera systems will require very careful appraisal, using well-established methods of assessing metric quality already available to survey organisations. The questions concerning image quality are more difficult to answer, as they require very specialised instrumentation if measurements are to be made directly in practice. Over the course of the past several decades a more analytical approach to assessing image quality has emerged, and one that may be used by individuals. The method is particularly effective where information on the micro-image characteristics of products is made available by the manufacturers concerned. An outline is given of some considerations that need to be taken into account when using an analytical approach, with references given for further reading.  相似文献